1GE ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.
1GE ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
1GE adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
1GE is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
1GE is designed by Realtek chipset 9601D
Technical Item |
Details |
Model |
HY81X |
PON interface |
1 GPON/EPON port(EPON PX20+ and GPON Class B+) |
Upstream: 1310nm, Downstream: 1490nm |
|
SC/APC connector |
|
Receiving sensitivity: ≤-27dBm |
|
Transmitting optical power: 0~+4dBm |
|
Transmission distance: 20KM |
|
LAN interface |
10/100/1000Mbps auto adaptive Ethernet interfaces. |
10/100/1000M Full/Half, RJ45 connector |
|
LED |
4 LED, For Status of POWER, LOS, PON, LAN |
Push-Button |
2, for Function of Power on/off, Reset |
Operating condition |
Temperature : 0℃~50℃ |
Humidity :10%~90%(non-condensing) |
|
Storing Condition |
Temperature : -40℃~+60℃ |
Humidity :10%~90%(non-condensing) |
|
Power supply |
DC 12V/1A |
Power Consumption |
<3W |
Net Weight |
<0.2kg |
Pilot |
Status |
Description |
POWER |
On |
The device is powered up. |
Off |
The device is powered down. |
|
LOS |
Blink |
The device doses not receive optical signals. |
Off |
The device has received optical signal. |
|
PON |
On |
The device has registered to the PON system. |
Blink |
The device is registering the PON system. |
|
Off |
The device registration is incorrect. |
|
LAN |
On |
Port is connected properly (LINK). |
Blink |
Port is sending or/and receiving data (ACT). |
|
Off |
Port connection exception or not connected. |
http://www.fiberidea.com/